-40%
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor
2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor

2x AC 110V Digital Hygrometer 0-99%RH Variable Humidity Controller Switch Sensor

$ 9.5

  • Analog/Digital: Digital
  • Brand: Unbranded
  • Control Accuracy: + / - 0.1% RH
  • Humidity Range: 0% - 99% RH
  • Input Voltage: AC 110V-220V
  • Item Size: 60 * 45 * 31mm / 2.36 * 1.77 * 1.22in
  • MPN: Does Not Apply
  • Measuring Accuracy: + / - 0.2% RH
  • Output Capacity: up to 10A
  • Output Type: Direct Output
  • Rated Power: 1500W
  • UPC: Does Not Apply
  • gtin13: Does Not Apply

Description

Features: Brand new and fine quality ABS material, not easy ageing. Stable and safe chip make this device more intelligent and effictive. After trepanning, it can install or embed on various equipments, and was convenient as well as practical. Can be used to control the humidity in many places, such as farm and other factories. This new design digital humidity controller with fine quality is practical to install and use, also has good performance. Specifications: Power Type: AC 110V- 2 20 V Display Type: Digital Humidity Range: 0 - 99% RH Measuring Accuracy: + / - 0. 2% RH Control Accuracy: + / - 0.1% RH Output Capacity: up to 10A Output Type: Direct Output Item Size: 60 * 45 * 31mm / 2.36 * 1.77 * 1.22in Package Included: 1 x Digital Humidity Controller with Sensor Note: 1.Connect to power supply, diplay instructions humidity. 2.Set to Start the Humidity: Press the UP button display and start the humidity, long press about 3 seconds to start the humidity flashing, then press the UP or Down to adjust the set. 3.Set to Stop the Humidity: Press the Down button display and stop the humidity, long press about 3 seconds to stop the humidity flashing, then press the UP or Down adjust the set. 4.Restore the Factory Settings: Press the UP and Down button at the same time, it will display 888 then will automatically detect the humidity.